Take Advantage of Paint Matching & Mixing Today!

Southwire 10 SOL SD CU THHN-THWN-AWM WHITE 500 FT

Southwire

Construction

  • Conductor: Solid sizes #14 AWG - #10 AWG use soft drawn annealed bare copper per ASTM B3. Stranded sizes #14 AWG - #10 AWG use Class C combination-unilay soft drawn annealed bare copper per ASTM B787.
  • Insulation: Heat and moisture resistant PVC
  • Sheath: Nylon


Standards & References

  • ASTM B3 Soft or Annealed Copper Wire
  • ASTM B787 19 Wire Combination Unilay-Stranded Copper Conductors
  • UL 83 Thermoplastic Insulated Wires and Cables
  • UL 758 Standard for Appliance Wiring Material
  • UL 1063 Machine Tool Wiring (MTW)
  • CSA C22.2 No. 75 Thermoplastic Insulated Wires and Cables
  • ICEA S-95-658 (NEMA WC70) Power Cables Rated 2000 Volts or Less for the Distribution of Electrical Energy
  • Federal Specification A-A-59544
  • NMX-J-010-ANCE Thermoplastic insulated wires and cables
  • NOM-063-SCFI Electrical Products – Conductors – Safety Requirements
  • NEMA 70901-2-2024 Make It American Compliance with Domestic Preference Requirements Pt. 2 Wire & Cable


APPLICATION

Southwire THHN copper conductors are primarily used in conduit for branch circuits in commercial or industrial applications as specified in the National Electrical Code® and other applicable codes and standards. Voltage for all applications is 600 volts. These conductors have multiple ratings depending upon the product application. Allowable temperatures are as follows:

  • THHN or T90 Nylon- Dry locations not to exceed 90°C
  • THWN- Wet locations not to exceed 75°C or dry locations not to exceed 90°C or locations not to exceed 75°C when exposed to oil
  • TWN75- Wet locations not to exceed 75°C
  • MTW- Wet locations or when exposed to oil at temperatures not to exceed 60°C or dry locations not to exceed 90°C (with ampacity limited to that for 75°C conductor temperature per NFPA 79)
  • AWM- Dry locations not to exceed 105°C only when rated and used as appliance wiring material


FEATURES

  • Gasoline and Oil Resistant II
  • VW-1 Sizes 14 through 10 AWG
  • FT1 All Sizes
  • AWM- Sizes 14 through 10 AWG
  • MTW- Stranded Constructions Only
  • RoHS Compliant


We Also Recommend

Hillman Hammer Drive Anchor 1/4" x 1-1/2"
Hillman

Hillman Hammer Drive Anchor 1/4" x 1-1/2"
Hillman Zinc Hardened Nylon Insert Grade C USS Coarse Stop Nut 5/8"-11
Hillman Group

Hillman Zinc Hardened Nylon Insert Grade C USS Coarse Stop Nut 5/8"-11
Hillman Hardware Essentials Gate Hook with Staples Zinc (5")
Hillman

Hillman Hardware Essentials Gate Hook with Staples Zinc (5")
Hillman Yellow Dichromate Grade 8 Hex Cap Screw 3/4" x 2"
Hillman

Hillman Yellow Dichromate Grade 8 Hex Cap Screw 3/4" x 2"
Hillman Split Lock Washer 7/8"
Hillman

Hillman Split Lock Washer 7/8"